Implement Limitations - Kubota B2410 Workshop Manual

82410 • 82710 • 82910 WSM, 12271
[11] IMPLEMENT LIMITATIONS
G GENERAL
The KU80TA Tractor has been thoroughly tested for proper performance with implements sold or approved by
KU80TA. Use with implements which exceed the maximum specifications listed below, or which are otherwise unfit
for use with the KU80TA Tractor may result in malfunctions or failures of the tractor, damage to other property and
injury to the operator or others. [Any malfunctions or failures of the tractor resulting from use with improper
implements are not covered by the warranty.]
~
Tread (max. width) with farm tires Lower link end max.
Front Rear
loading weight W
0
82410
2WD : 900 mm (35.4 in.)
1064 mm (39.6 in.) 300 kg (660 Ibs)
4WD : 835 mm (32.9 in.)
82710
82910
935 mm (36.8 in.) 1050 mm (41.3 in.) 360 kg (800 Ibs)
~
Actual figures
Implement weight W1 and
Max. Drawbar Load W2
Trailer loading weight W3
/ or size
Max. capacity
82410 300 kg (660 Ibs) 1000 kg (2200 Ibs)
82710
As in the following list
(Shown on the next page)
500 kg (1100 Ibs)
1500 kg (3300 Ibs)
82910
Lower link end max. hydraulic lifting capacity .....
WO
Implement weight ................................................ The implement's weight which can be put on the lower link:
W1
Max. drawbar load ...............................................
W2
Trailer loading weight .......................................... The max. loading weight for trailer (without trailer's weight) :
W3
~G)
'\
Wo
~@=t:;p ~~
(+)
t
B
8
~~
W1
W2
11790FOO750
NOTE:
• Implement size may vary depending on soil operating conditions.
12271 G00280
G-47