Connecting The User System - Renesas Emulation Probe M30850T2-EPB User Manual

M30850T2-EPB User's Manual

2.9 Connecting the User System

There are eight ways available to connect the emulation probe to user systems as shown in Figure 2.7.
0.65mm pitch
M3T-F160-100NRB LCC socket
100-pin QFP 100-pin LCC
(not included) (not included)
Figure 2.7 Connection of the M30850T2-EPB and user system
Note on Connecting the User System:
Take care not to attach the converter board in a wrong direction. It may cause a fatal damage to the emulator.
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK and TQSOCKET are trademarks of Tokyo Eletech
Corporation.
REJ10J1005-0200 Rev.2.00 April 1, 2007
100-pin
M30800T-PTC
(not included)
M3T-FLX100-T
(not included)
M3T-DIRECT100S
100-pin QFP
(not included)
●: No1. pin
*1: These items are available in one package
CAUTION
Emulation probe
M3T-100LCC-DMS
(not included)
M3T-FLX100-R
(not included)
*1
M3T-DUMMY100S
100-pin QFP
(not included)
144-pin 0.5mm pitch
0.5mm pitch
M3T-F160-100NSD
100-pin LQFP
(not included)
Page 29 of 98
2. Setup
M3T-FLX-144NSD
144-pin LQFP
(not included)