Table of Contents
Advertisement
M30850T2-EPB User's Manual
(2) Target Status LEDs
The target status LEDs indicate the target MCU's operating status and target board's power supply. Table 1.4 lists the definition
of each target status LED.
Table 1.4 Definitions of the target status LEDs
Name
Status
POWER
ON
OFF
CLOCK
ON
OFF
RESET
ON
OFF
RUN
ON
OFF
WARNING
ON
OFF
Caution for Target Status POWER LED:
If your MCU has two or more power supply terminals (VCC), you need to supply power to all the terminals.
REJ10J1005-0200 Rev.2.00 April 1, 2007
Power is supplied to the target MCU.
Power is not supplied to the target MCU.
Target MCU clock is oscillating.
Target MCU clock is not oscillating.
Target MCU is being reset.
Target MCU is not being reset.
User program is being executed.
User program has been halted.
Target MCU internal clock is not oscillating.
Target MCU internal clock is oscillating.
Meaning
CAUTION
1. Outline
Page 16 of 98
Advertisement
Table of Contents
