Troubleshooting; Flowchart To Remedy The Troubles - Renesas Emulation Probe M30850T2-EPB User Manual

M30850T2-EPB User's Manual

5. Troubleshooting

This chapter describes how to troubleshoot when this product does not work properly.

5.1 Flowchart to Remedy the Troubles

Figure 5.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emulator
debugger starts up. Check this while the user system is disconnected. For the latest FAQs visit the Renesas Tools Homepage.
Turning on emulator
Front panel LED
of emulator
Init dialog box of emulator
debugger displayed
EMEM dialog box of
emulator debugger
Program window of emulator
debugger displayed
Emulator debugger startup completed
Figure 5.1 Flowchart to remedy the troubles
REJ10J1005-0200 Rev.2.00 April 1, 2007
http://www.renesas.com/tools
Not normal
1. Check connection of the power supply cable.
Normal
2. Check that the power is properly supplied to the user system
Not normal/Error displayed
1. Check the operating environment etc. of the emulator debugger.
Normal
2. Reinstall the emulator debugger.
Not normal/Error displayed
See
Normal
Debugger Startup
Error displayed
Normal
"
See
2.5 Connecting the Power Supply for the Emulator
"
See 2.6 Turning ON the Power
See the user's manual of the emulator debugger.
"
5.2 (2) EMEM Dialog Box Does Not Appear at
"
(page 92).
"
See 5.2 (3) Errors Occur at Debugger Startup
5. Troubleshooting
"
(page 23).
"
(page 24).
"
(page 93).
Page 90 of 98