Hardware Specifications; Target Mcu Specifications - Renesas Emulation Probe M30850T2-EPB User Manual

M30850T2-EPB User's Manual

4. Hardware Specifications

This chapter describes specifications of this product.

4.1 Target MCU Specifications

Table 4.1 lists the specifications of target MCUs which can be debugged with this product.
Table 4.1 Specifications of target MCUs for the M30850T2-EPB
Item
Applicable MCU
Applicable MCU mode
Maxi. ROM/RAM capacity
Operating voltage/frequency*
* When the JP1 of the M30850T2-EPBM is set to VCC1>VCC2, the voltage of VCC2 on the user system should be 3.3 V or
more.
REJ10J1005-0200 Rev.2.00 April 1, 2007
M32C/80, 84, 85, 86 and 8A Groups
Single-chip mode, memory expansion mode, microprocessor mode
1. Internal flash ROM: 512 KB + 4KB
0F000h--0FFFFh, F80000h--FFFFFFh
2. Internal RAM: 24 KB
00400h--063FFh
VCC1=VCC2=4.2--5.5 V: 32 MHz
VCC1=VCC2=3.0--5.5 V: 24 MHz
Dual-power supply specification
(4.8V ≤ VCC1 ≤ 5.2V and 3.3V ≤ VCC2 ≤ VCC1): 32MHz
Description
4. Hardware Specifications
Page 75 of 98