Renesas Emulation Probe M30850T2-EPB User Manual page 64

M30850T2-EPB User's Manual
(3) When DATA ACCESS is selected
1. Window for setting the address
2. Window for setting data
REJ10J1005-0200 Rev.2.00 April 1, 2007
3. Usage (How to Use the Emulator Debugger)
Setting the address
You can set eight conditions, e.g., a specified address, a
specified address range, etc.
Setting data
You can set eight conditions, e.g., a specified data, a
specified data range, etc.
Setting the access condition
You can set three conditions, e.g., read, write, and
read/write. When you have finished setting the data and
access condition, click OK.
Page 64 of 98