Renesas Emulation Probe M30850T2-EPB User Manual page 47

M30850T2-EPB User's Manual
3. Specifying the communication interface (LAN communication)
Cancel
4. Specifying the communication interface (USB communication)
Cancel
REJ10J1005-0200 Rev.2.00 April 1, 2007
Help
Help
3. Usage (How to Use the Emulator Debugger)
Specifying the communication interface
(LAN communication)
For selecting the LAN communication, click the radio
button "LAN" of the MCU tab. Specify the IP address of the
emulator at the IP address area. Specify the IP address by
one byte of decimal number separating each four bytes with
a period. Specify the port number at the Port area.
Specifying the communication interface
(USB communication)
For selecting the USB communication, click the radio
button "USB" of the MCU tab. The emulators connected by
USB cable are shown at Serial No. area. Select the serial
No. of the emulator you are going to connect.
Page 47 of 98