Renesas M30830T-EPBM User Manual

Mcu board for replacing m30830t-epb

Download this manual

To our customers,

On April 1

, 2010, NEC Electronics Corporation merged with Renesas Technology

Corporation, and Renesas Electronics Corporation took over all the business of both

companies. Therefore, although the old company name remains in this document, it is a valid

Renesas Electronics document. We appreciate your understanding.

Issued by: Renesas Electronics Corporation (http://www.renesas.com)

Send any inquiries to http://www.renesas.com/inquiry.

Old Company Name in Catalogs and Other Documents

Renesas Electronics website:

http://www.renesas.com

April 1

, 2010

Renesas Electronics Corporation

Page 1 On April 1 , 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding.
Page 2 Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific”...
Page 3 (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. • These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's application;...
Page 4: Package Components
1. Outline The M30830T-EPBM is an MCU board for replacing emulation probe M30830T-EPB for the M32C/81, 82 and 83 Group MCUs. For the emulation probe, you need to replace an MCU board in the following case. • At the end of the life of MCUs with internal flash ROM Because the maximum number of iteration of writing into and erasing internal flash ROM is limited, when it is at the end of its life, replace the MCU for the emulator.