Renesas Emulation Probe M30850T2-EPB User Manual page 63

M30850T2-EPB User's Manual
4. Opening the break event setting dialog box
(2) When FETCH is selected
1. Window for setting addresses
REJ10J1005-0200 Rev.2.00 April 1, 2007
3. Usage (How to Use the Emulator Debugger)
Specifying the event type
Click to select the event type you want to set.
- FETCH
Detects an instruction prefetch.
- DATA ACCESS
Detects a memory access.
- BIT SYMBOL
Detects a bit access.
- INTERRUPT
Detects an interrupt occurrence or interrupt termination.
- TRIGGER
Detects a signal from the external trace signal input
cable.
Setting the address
You can set eight conditions, e.g., a specified address, a
specified address range, etc. When you have finished setting
the address, click OK.
Page 63 of 98