Renesas Emulation Probe M30850T2-EPB User Manual page 93

M30850T2-EPB User's Manual
(3) Errors Occur at Debugger Startup
Table 5.3 Checkpoints of errors at debugger startup
Error
Target MCU is uncontrollable.
REJ10J1005-0200 Rev.2.00 April 1, 2007
(1) Check that the NQPACK etc. mounted on the user system is soldered
properly.
(2) Check that the connector is installed properly to the user system.
(3) Check pin NMI# is held high.
(4) If in memory expansion mode or microprocessor mode, check pins
RDY# and HOLD# are held high.
(5) The program may be uncontrollable in areas where memory is not
allocated. Recheck the map setting.
Checkpoint
5. Troubleshooting
Page 93 of 98