Renesas Emulation Probe M30850T2-EPB User Manual page 54

M30850T2-EPB User's Manual
2. Referring to the MCU Status
Cancel
Notes on Selecting a Processor Mode:
The MCU status is shown in "MCU Status" of the EMEM dialog box. Check that it is matching the specified
processor mode.
Check that the RDY# and HOLD# are "H" level. If they are "L" level, as the MCU enters a wait status and the
emulator debugger cannot receive the signal from the MCU, an error is displayed.
REJ10J1005-0200 Rev.2.00 April 1, 2007
Help
IMPORTANT
3. Usage (How to Use the Emulator Debugger)
Referring to the MCU Status
It shows the status of each MCU pin. Check it to see if the
MCU status matches the selected processor mode. If a slider
of any pin is at the center, it means that the pin status is
indeterminate.
Page 54 of 98