Operations Of Plc Function (Pr.414, Pr.415, Pr.498, Pr.1150 To Pr.1199) - Mitsubishi Electric A800 Programming Manual

Operations of PLC function (Pr.414, Pr.415, Pr.498, Pr.1150 to Pr.1199)

1.6
Operations of PLC function (Pr.414, Pr.415,
Pr.498, Pr.1150 to Pr.1199)
I/O information can be read or written by accessing the inverter with special relays, special registers, etc. using
predetermined methods.
It is possible to operate the inverter and read and write parameters using input information from control input terminals
according to created sequence programs (saved in the inverter).
Output signals are also be output from control output terminals, not only as status signals of the inverter but as signals
to turn the pilot lamp ON and OFF, interlock signals, and other control signals set by users as desired.
Parameter
number
414 PLC function operation selection
415 Inverter operation lock mode setting
498 PLC function flash memory clear
1150 to 1199 PLC function user parameters 1 to 50
12
PLC Function
Name
Initial
Setting range
value
0 0 to 2
0 0, 1
0 0, 9696 (0 to 9999)
0 0 to 65535
Refer to page
14
14
53
49