Download  Print this page

System Configuration; System Configuration Example - Mitsubishi Electric A800 Programming Manual

800 series, plc function.
Hide thumbs

Advertisement

System configuration

2.1
System configuration
2.1.1

System configuration example

• Programmable controller side
Mount the "CC-Link system master/local module" on the main base unit or extension base unit that uses the programmable
controller CPU as the master station.
• Use the CC-Link dedicated cable to connect the CC-Link programmable controller module (master station) to the inverter.
NOTE
• For details on CC-Link communication wiring and the CC-Link cable, refer to the Instruction Manual of the FR-A8NC.
56
CC-Link communication
Master station
QJ61BT11N,
etc.
Terminating
resistor
Power
supply
CC-Link dedicated cable
Inverter
Inverter
Up to 42
units can be
connected
when only
inverters are
connected
Power
Motor
Motor
supply
Remote device station
Terminating
resistor

Advertisement

Table of Contents

This manual is also suitable for:

F800

Comments to this Manuals

Symbols: 0
Latest comments: