Mitsubishi Electric A800 Programming Manual page 197

Display instruction
 Setting data: For user monitor name
Set the monitor name as shown below when SD1216 to 1218 are monitored by the LCD operation panel (FR-LU08) or the
parameter unit (FR-PU07).
Upper 8 bits
+0 ****
S
2nd character 1st character
4th character
6th character
8th character
10th character 9th character
12th character 11th character
14th character 13th character
16th character 15th character
S
+8
• Set 01 to the lower 8 bits of
• Set the monitor description number to replace the user monitor name display in the upper 8 bits of
The monitor description number is as shown below.
Monitor description number
40
41
42
• When the upper 8 bits of
ERROR: 4100) is generated.
• When the 7th bit of
returns to normal.
• Settings can be made up to the 16th character. (Data from
• Up to 12 characters can be displayed on the FR-LU08 or the FR-PU07. When the number of characters exceeds 12,
the 13th character or later will not appear.
NOTE
• To display the monitor above on the parameter unit (FR-LU08 or FR-PU07), set "40, 41, 42" in Pr.774 to Pr.776 in advance.
(For details on Pr.774 to Pr.776, refer to the Instruction Manual (Detailed) of the inverter.)
 Setting data: For user-defined error name
Set the user-defined error name as shown below to display the user-defined error on the LCD operation panel (FR-LU08)
or the parameter unit (FR-PU07). (A user defined error occurs when values 16 to 20 are set in SD1214.)
Upper 8 bits
****
S
+0
2nd character 1st character
4th character
6th character
8th character
10th character 9th character
12th character 11th character
14th character 13th character
16th character 15th character
S
+8
• Set an error number that corresponds to the upper 8 bits of
• When the upper 8 bits of
generated.
• When the 7th bit of
• Settings can be made up to the 16th character. (Data from
• Up to 12 characters can be displayed on the FR-LU08 or the FR-PU07. When the number of characters exceeds 12,
the 13th character or later will not appear.
196
Sequence program
Lower 8 bits
Set the corresponding monitor number to the upper 8 bits, and 01 to the lower 8 bits.
01
Monitor name: Character start
3rd character
5th character
7th character
S
+0.
Monitor description
User monitor 1: SD1216 description
User monitor 2: SD1217 description
User monitor 3: SD1218 description
S
+0 are values other than those in the table above, an operation error (OPERATION
S
+0 is executed as 1 (lower 8 bits as H81), the registered data is cleared and the monitor display
Lower 8 bits
Set the corresponding error number to the upper 8 bits, and 02 to the lower 8 bits.
02
Error name: Character start
3rd character
5th character
7th character
S
+0 are values other than 16 to 20, an operation error (OPERATION ERROR: 4100) is
S
+0 is executed as 1 (lower 8 bits as H82), the registered data is cleared.
S S
+1 to +8 are effective as characters.)
S
+0. The setting range is from 16 to 20.
S S
+1 to +8 are effective as characters.)
S
+0.