Mitsubishi Electric A800 Programming Manual page 22

Device number
2-word parameter access
SM1257
setting
Clock data setting
SM1258
completion flag

Always for the STF signal in the Network operation mode. Changing the function with Pr.178 is disabled.

Always for the STR signal in the Network operation mode. Changing the function with Pr.179 is disabled.

Even if the FR-A8AY or FR-A8AR is not installed, Pr.313 to Pr.322 are accessible during PLC function operation, and the operating status of the
output terminal (virtual output terminal) function is stored in each device.

For the FR-F800 series, no function is assigned in the initial setting.
Name
Set the object as 2 word parameter when inverter parameter write is
executed using X28 to X2B, Y28 to Y2B.
OFF: Carries out writing as 1-word parameter.
ON: Carries out writing as 2-word parameter.
Turned ON when the clock data is set using an external peripheral device,
parameter, or SM210. This is turned OFF when SM213 is turned ON.
Description
PLC Function
Device map
1
21