Mitsubishi Electric A800 Programming Manual page 180

Execution condition
The execution conditions for exclusive OR instructions are as follows.
Operation
command
WXOR
WXORP
Program example
WXOR
• Program that executes exclusive OR for D10 and D20 data when XA turns ON, and stores the results in D10.
• Program that executes exclusive OR for X10 to 1B data and D33 data when XA turns ON, and outputs the results to Y30 to
3B.
Executed every Executed every
scan. scan.
Executed only once.
Application instructions (16-bit)
Executed only once.
Sequence program
3
179