Mitsubishi Electric A800 Programming Manual page 32

Device
Name
number
2-word parameter content (lower)
SD1320
(RAM)
2-word parameter content
SD1321
(upper) (RAM)
2-word parameter content (lower)
SD1322
(EEPROM)
2-word parameter content
SD1323
(upper) (EEPROM)

Always "MAIN". After "MAIN", four space (20H) characters are stored.

Always for the STF signal in the Network operation mode. Changing the function with Pr.178 is disabled.

Always for the STR signal in the Network operation mode. Changing the function with Pr.179 is disabled.

The Pr.811 setting is available only for the FR-A800 series.

Monitoring is available only for the FR-A800 series.

Monitoring is available only for the FR-F800 series.

Settings differ according to the inverter capacity.
Description
Use 2-word inverter parameters to read or write using sequence
programs.
SD1320: Lower 1 word
SD1321: Upper 1 word
Use 2-word inverter parameters to read or write using sequence
programs.
SD1322: Lower 1 word
SD1323: Upper 1 wo
Device map
Page
46,
47
31
PLC Function
1