Emergency Systems And Procedures; Emergency Lowering - Mec 1330SE Service And Parts Manual

E
MERGENCY
IF THE CONTROL SYSTEM FAILS WHILE THE PLATFORM IS ELEVATED, HAVE
AN EXPERIENCED OPERATOR USE THE EMERGENCY LOWERING PROCEDURE
TO SAFELY LOWER THE PLATFORM.
DO NOT ATTEMPT TO CLIMB DOWN ELEVATING ASSEMBLY.
E
M E R G E N C Y
E
M E R G E N C Y
IF THE CONTROL SYSTEM FAILS WHILE THE PLATFORM IS ELEVATED,
USE THE EMERGENCY LOWERING PROCEDURE TO SAFELY LOWER THE
PLATFORM.
DO NOT CLIMB DOWN THE ELEVATING ASSEMBLY OR EXIT THE PLATFORM.
The Emergency Lowering System is used to
lower the platform in case of power failure.
To lower the platform, pull the Emergency Lower-
ing Knob, located near the Base Control panel.
July 2017
Page X
S
YSTEMS AND
S
T O P
The machine is equipped with an EMERGENCY STOP switch
at the base controls and the platform control box.
•Press the EMERGENCY STOP switch at any time to stop all machine
functions.
•Pull switch to reset.
•Either switch will stop all machine functions.
ART_4979
•Both switches must be reset or machine will not operate.
L
O W E R I N G
"1330SE" Service and Parts Manual
P
ROCEDURES
Figure 1-3: Emergency Stop Buttons
Figure 1-4: Emergency Lowering
Emergency
Lowering
Knob
ART_4986