Secondary Pci Riser Options; Installing A Low-Profile Pcie Expansion Board - HPE ProLiant XL170r Gen10 User Manual

14. Install the primary PCI riser cage.
15. Route and connect all necessary cables.
Type-p Smart Array controller with internal ports and cables
16. Do one of the following:
• Install the secondary PCI riser blank.
• Install the secondary PCI riser cage.
17. Install the bayonet board.
18. Install the air baffle.
19. Install the server into the chassis.
20. Power up the server.

Secondary PCI riser options

Installing a low-profile PCIe expansion board

Determine if there are temperature requirements for the component. For more information, see
Temperature requirements.
Depending on the chassis configuration and the component being installed in the server, it might be
necessary to limit the number of drives installed in the chassis. For more information, see List of
components with temperature requirements in the HPE ProLiant XL170r Gen10 Server.
IMPORTANT: The HPE Apollo r2800 Gen10 Chassis with 16 NVMe does not support servers using
the embedded SATA HPE Dynamic Smart Array S100i Controller or any type-p plug-in Smart Array
Controller with internal ports and cables.
46 Secondary PCI riser options