Removing The Primary Pci Riser Blank - HPE ProLiant XL170r Gen10 User Manual

3. If removed, install the bayonet board.
4. Install the air baffle.
5. Install the server into the chassis.
6. Power up the server.

Removing the primary PCI riser blank

CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
either riser blanks or riser cages are installed.
Procedure
1. Back up all server data.
2. Power down the server.
3. Remove the server from the chassis.
4. Remove the air baffle.
5. If a secondary PCI riser cage is installed, remove the bayonet board.
6. Do one of the following:
• Remove the secondary PCI riser blank.
• Remove the secondary PCI riser cage.
7. Remove the primary PCI riser blank.
32 Removing the primary PCI riser blank