Prerequisites
Before installing this option, be sure that you have the following:
The components included with the hardware option kit.
For more information on specific options, see the server QuickSpecs on the Hewlett Packard Enterprise
website.
Procedure
1. Power down the server.
2. Remove the server from the chassis.
3. Remove the air baffle.
4. Open the DIMM slot latches.
5. Install the DIMM.
IMPORTANT: Ensure that the DIMM latches are fully closed.
6. Install the air baffle.
7. Install the server into the chassis.
8. Power up the server.
To configure the memory mode, use UEFI System Utilities (see UEFI System Utilities on page 77).
Primary PCI riser options
Installing primary PCI riser options
Determine if there are temperature requirements for the component. For more information, see
Temperature requirements.
Depending on the chassis configuration and the component being installed in the server, it might be
necessary to limit the number of drives installed in the chassis. For more information, see List of
components with temperature requirements in the HPE ProLiant XL170r Gen10 Server.
Primary PCI riser options
43