Installing The Media Module - HPE ProLiant XL170r Gen10 User Manual

8. Install the air baffle.
9. Install the server into the chassis.
10. Power up the server.

Installing the Media Module

Procedure
1. Back up all server data.
2. Power down the server.
3. Remove the server from the chassis.
4. Remove the air baffle.
5. If a secondary PCI riser cage is installed, remove the bayonet board.
6. Do one of the following:
• Remove the secondary PCI riser blank.
• Remove the secondary PCI riser cage.
7. Do one of the following:
• Remove the primary PCI riser blank.
• Remove the primary PCI riser cage.
8. Remove the media module blank.
52 Installing the Media Module