3.
Remove the server from the chassis.
4.
Remove the air baffle.
5.
Remove the DIMM guard.
6.
Install the SSD module on the M.2 SSD riser:
a. Insert the SSD module into the SSD slot at a 45 degree angle, and then gently press it down
against the M.2 SSD Enablement board.
b. Secure the SSD module to the M.2 SSD riser with a screw.
c. Repeat the process if you are installing a second SSD module.
7.
Install the M.2 SSD riser. Ensure that the component is firmly seated in the connector.
Hardware options installation
51