FR3 Mounting Instructions
Step 1: Lift the drive out of the carton. Remove the
packaging.
Step 2: Attach the drive to the mounting plate with four
M6x15 or 1/4 inch screws and four M6 or 1/4 inch
nuts. The opening dimensions on the mounting
plate should follow required dimensions (refer to
the drive mounting template printed on the outside
carton).
Screw: Four M6x15
or 1/4 inch
Nut: Four M6
or 1/4 inch
Chapter 6—Installation Requirements
FR4 Mounting Instructions
Step 1: Lift the drive out of the carton with the cardboard.
Remove the packaging.
Step 2: Attach the drive to the mounting plate with four
M8x15 or 3/8 inch screws and four M8 or 3/8 inch
nuts. The opening dimensions on the mounting
plate should follow required dimensions (refer to
the drive mounting template printed on the outside
carton).
DG1 Series VFD MN040002EN—March 2014 www.eaton.com
Screw: Four M8x15
or 3/8 inch
Nut: Four M8
or 3/8 inch
27