Inserting The Battery; Connecting The Ac Power Adapter - GE MAC 800 Operator's Manual

Equipment Overview

Inserting the Battery

This system is shipped with a lithium-ion battery that charges when it is inserted
into the system connected to AC power.
1. Gently turn over the device and find the empty battery compartment.
2. Insert the battery as shown in the following illustration.
NOTE:

Connecting the AC Power Adapter

The system can run using AC or battery power. When the device is plugged into an AC
outlet, it uses AC power and charges the installed battery.
NOTE:
The system should be connected to an independent power socket and used alone
in the patient environment.
34
The battery charges when it is inserted into a system that is connected to AC
power. You may begin using the system connected to AC power. Do not use
the system on battery power until the battery is fully charged as indicated
by the on-screen battery gauge and the solid amber LED next to the display.
MAC™ 800 2060026-001C