Table of Contents
Advertisement
RR Analysis
Laser Print
Main Menu
Return
RR Analysis Setup
The RR Analysis Setup function allows you to configure the RR Analysis report,
including:
• Target
• Record lead
• Waveform parameters
• Report options
To access the RR Analysis Setup function from the device Main Menu, press RR
Analysis> RR Analysis Setup.
The following table describes each available setting on the RR Analysis Setup window.
Target
Record Lead
Line Filter
Pace Enhance
Gain
74
Option
Prints the RR Analysis Report to an external USB laser printer or
network laser printer.
Exits the RR Analysis mode and returns to the Main Menu.
Returns to pre-test status.
Field
MAC™ 800
Description
Description
Selects the target of the test.
Selects which rhythm lead is displayed and stored.
Enables/disables the line filter defined in Country
Setup. Refer to
"Country Setup" on page 108
information.
Improves the readability of pacemaker ECGs. Options are
On and Off.
Sets the magnitude of the ECG signal. Measurement
is in millimeter per millivolt (mm/mV) and includes the
following options:
• 2.5 mm/mV
• 5 mm/mV
• 10 mm/mV
• 20 mm/mV
• 40 mm/mV
• Automatic
The larger the selected measurement, the larger the
waveform appears. Only the appearance of the waveform
changes; signal strength is not affected.
NOTE:
If Automatic is selected, the system calculates the
best gain based on the peak-to-peak amplitudes of
all displayed leads and the selected display format.
for more
2060026-001C
Advertisement
Table of Contents
