Table of Contents
Advertisement
3.
To load a different setup, do the following:
a.
b.
c.
4.
To delete a setup file, do the following:
a.
b.
c.
5.
To change the name of a system setup file, do the following:
a.
b.
c.
6.
To remove all custom settings, do the following:
a.
b.
c.
7.
When you are done, press F6 (Return) to exit.
Export Setup
The Export Setup utility allows you to export saved settings from the device to an SD
card. You can then use the SD card to import the settings to another device, greatly
simplifying the installation and configuration of multiple devices.
1.
Insert the SD card.
2.
From the Main Menu, press F4 (System Configuration) > F6 (More) > F6 (More) >
F3 (Export Setup).
The Select Setup for Export window opens. All saved settings on the device
are listed in the left column. All saved settings on the SD card are listed in the
right column.
3.
In the left pane, select the setup file you want to export.
4.
Press F1 (Export).
The selected file is copied to the SD card and is displayed in the right column.
2060026-001C
Select the setup you want to load.
Press F1 (Load Setup).
Restart the system.
You must power the device off and then on for all setup changes to take
effect, especially if the new setup includes a change to the language
setting; the language does not change until the system restarts.
Select the file you want to delete.
Press F2 (Delete).
You are prompted to confirm the deletion.
Press F6 (OK).
NOTE:
You cannot delete a configuration that is currently loaded.
Select the setup file you want to change.
Press F4 (Edit Name).
The Setup Name window opens.
Type the new name and press F6 (Save).
Select the setup file you want to reset.
Press F5 (Factory Defaults).
When prompted to confirm, press F6 (Yes).
MAC™ 800
System Configuration
119
Advertisement
Table of Contents
