Table of Contents
Advertisement
Equipment Overview
CAUTION:
PROPER LEADWIRE CONNECTION — Improper connection of the leadwires can
cause inaccuracies in the ECG.
Trace each individual leadwire from its acquisition cable label to the colored
connector and then to the proper electrode to ensure that it is matched to the
correct label location.
Item
1
2
3
4
Leadwire Adapters
The leadwires require an adapter to connect to an electrode, as shown in the following
illustration.
Item
1
2
3
4
32
Name
D-Sub 15-pin male connector
Multi-link acquisition cable leads
NEHB acquisition cable leads
Value acquisition cable leads
leadwire end
4 mm pin
grabber
Mactrode clip
MAC™ 800
Description
Connects to the system's ECG signal
input connector. One end of each
acquisition cable consists of a D-sub
15-pin male connector.
The lead end of the multi-link
acquisition cable attaches to the
leadwire adapters and uses 10 or 12
leadwires.
The lead end of the NEHB acquisition
cable attaches to the leadwire adapters
and uses 12 leadwires.
The lead end of the value acquisition
cable consists of 10 leadwires.
Description
2060026-001C
Advertisement
Table of Contents
