Table of Contents
Advertisement
Time Zone
Adjust clock for daylight
savings time
Order Manager Setup
To configure the system's Order Manager, from Main Menu, press F4 (System
Configuration) > F6 (More) > F6 (More) > F6 (More) > F2 (Order Manager Setup), and
complete the fields described in the following table.
Field
Initial sort value
Auto order delete
Default order locations
2060026-001C
Field
Identifies the time zone in which the device is located. This
field is available only if Automatically synchronize with
Time Server is enabled in Basic Setup.
Refer to
Determines whether the system automatically adjusts the
system time for daylight savings time. This field is available
only if Automatically synchronize with Time Server is
enabled in Basic Setup.
Refer to
MAC™ 800
Comment
"Basic Setup" on page
87.
"Basic Setup" on page 87
Comment
Determines how the Order Manager initially
sorts the ECGs. Select one of the following
values:
• Patient name
• Patient ID
• Location
• Time
• Stat
Determines whether the system will
automatically delete orders under the
following conditions:
• the orders have been successfully
transmitted to a receiving device, and
• the associated ECGs have been
transmitted and deleted.
This field is NOT dependent on the Delete
after transmit field on the Basic Setup
window. Both fields operate independently.
Identifies the locations displayed on the
prompt when downloading orders. This will
typically be the device's location (see
Setup" on page
87).
If the device is used in multiple locations,
enter multiple locations and separate them
with commas: 1,3,10, and so on.
System Configuration
for more information.
"Basic
117
Advertisement
Table of Contents
