Table of Contents
Advertisement
RR Analysis
When the target is achieved, a preview of the summary results, histogram,
and trendgram is displayed.
8.
While reviewing the preview, do any of the following:
• Discard the reading and start over.
• Discard the reading and return to the Main Menu.
• Accept the reading and print the report on the thermal printer.
• Accept the reading and print the report on an external laser printer.
• Accept the reading and export the results to a PDF file.
For more information on each option, refer to
RR Analysis Options
The following options are available before you begin an RR Analysis test:
Start Test
Patient Data
RR Analysis Setup
Main Menu
Waveform Options
The following options are available during the RR Analysis test:
Stop Test
Sweep Speed
72
Press Return and repeat from 6.
Press Main Menu.
Press Print.
Press Laser Print.
Press PDF Export.
Option
Option
MAC™ 800
"Output Options" on page
Description
Starts the RR Analysis test.
Opens the patient data entry window.
Configures the RR Analysis test. Refer to
Setup" on page 74
for details.
Exits the RR Analysis mode and returns to the Main Menu.
Description
Stops the RR Analysis test.
Changes the speed of the waveform on the display and
printout. Changing the speed also changes the speed at
which the wiper bar moves across the display.
Measurement is in millimeter per second (mm/s) and
includes the following options:
• 12.5 mm/s
• 25 mm/s
• 50 mm/s
73.
"RR Analysis
2060026-001C
Advertisement
Table of Contents
