Table of Contents
Advertisement
Arrhythmia Mode Recording
• If you have determined enough information was recorded, press F2 (Confirm
8.
Select the type of Arrhythmia Report you want to print and press the appropriate
function key.
• To print the summary report, press F1 (Print Summary).
• To print the table report, press F2 (Print Table).
• To print the episodes report, press F3 (Print Episodes).
Refer to
9.
Review the report as necessary.
For more information, refer to
Arrhythmia Options
The system provides several options for configuring an Arrhythmia report. The
options, presented as option keys across the bottom of the display, are listed in the
following table.
Function Key Option
F1
F2
66
This returns to the recording mode. Repeat from step 6.
Stop).
Report options become available.
"Printing Options" on page 68
Start/Stop Recording
Sweep Speed
MAC™ 800
for details.
"Arrhythmia Codes" on page
Description
Starts and stops the arrhythmia reading.
Changes the speed of the waveform on the
display and printout. Changing the speed also
changes the speed at which the wiper bar
moves across the display.
Measurement is in millimeter per second (mm/s)
and includes the following options:
• 25 mm/s
• 50 mm/s
• 12.5 mm/s - 5 mm/s
When the option includes two speeds (12.5
mm/s - 5 mm/s), the first speed is for the display
and the second speed is for the printout.
68.
2060026-001C
Advertisement
Table of Contents
