Table of Contents
Advertisement
Entering Patient Information
3.
Use the F3 and F4 keys to move backward and forward through the patient
data windows.
The F4 key moves forward one screen.
The F3 key moves backward one screen.
NOTE:
4.
When all the patient data has been entered, press the F6 key to save the data.
Entering Patient Information with a
Barcode Reader
Using a barcode reader can simplify the entry of patient information and reduce
the chance of introducing errors. When you scan a patient's barcode, it retrieves
the patient information encoded in the barcode. You can then verify or modify the
information as appropriate.
To use the barcode reader, it must be connected to the USB port on the device's rear
panel and properly configured. Refer to
on setting up the optional barcode reader.
1.
When the Scan the Patient Barcode prompt appears on the screen, scan the
patient's barcode.
The following message is displayed on the screen and the barcode reader
beeps: Please wait. The first Patient Data window opens with the data from the
patient's barcode entered in the appropriate fields.
2.
Confirm that the data entered from the patient's barcode is accurate.
3.
Enter or modify patient information as necessary.
Refer to
4.
After verifying that the patient information is correct, press the F6 key to save
the patient data.
48
If the CTDG (Clinical Trial Data Guard) option is activated, you enter clinical
trial data on the last window.
"Entering Patient Information Manually" on page 47
MAC™ 800
"Patient Setup" on page 109
for instructions
for details.
2060026-001C
Advertisement
Table of Contents
