Table of Contents
Advertisement
• Main Screen
• A window prompting you to enter User ID and Password.
NOTE:
The password window opens only if the High Security Mode option is selected in
Basic Setup. You can press F1 (STAT ECG) to begin taking an ECG without logging
in to the system.
Using the Keyboard
You interact with the system by using the keyboard. In addition to entering data as
you would any keyboard, use it to:
• Select menu options
• Navigate through data entry fields
For a complete description of the keyboard features, refer to
page
30. For information on entering data using the keyboard, refer to
Using the T9 Key" on page
Selecting Menu Options
Configure the system and initiate ECG readings by selecting menu options that are
arranged across the bottom of the display. Up to six menu options are available
at any given time, and each option corresponds to a function key (F1– F6) directly
below the display.
Press a function key to select the corresponding menu option. Depending on the
selected option, one of the following results occurs:
• Take an ECG
For example, selecting the Resting ECG menu option opens the Resting ECG
function.
• Change a setting
For example, during a resting ECG, selecting the 25 mm/s option changes the speed
of the reading.
• Open a window
For example, the Patient Data option opens the Enter Patient Data window.
• Save your selections
After entering data or changing a configuration, you may have the option to save
your changes by selecting the Save menu option.
2060026-001C
40.
MAC™ 800
Equipment Overview
"Keyboard Layout" on
"Entering Data
39
Advertisement
Table of Contents
