Table of Contents
Advertisement
Recording a Resting ECG
Item
10
Resting ECGs
A resting ECG is the default mode of the cart system, although you may change this in
the system configuration. This section describes how to record a resting ECG and the
available options.
Recording a Resting ECG
The following steps describe how to conduct a resting ECG.
NOTE:
To take a stat ECG, do one of the following:
• If the password screen is displayed, press STAT ECG.
• If the password screen is not displayed, go directly to step 2.
1.
Prepare the patient as described in
2.
Verify the system is in Resting ECG mode.
If the system is not in the Resting ECG mode, on the Main menu press F1 to
select Resting ECG.
3.
Enter the patient data as described in
52
Name
3
Date
4
Time
5
Battery status indicator
6
Internal storage indicator
7
Hookup Advisor Indicator
8
Patient's Heart Rate
9
Menu Options
Lead Labels
Resting ECG Display
Current system date.
Current system time.
Displays the current battery level.
This is displayed only when the device is
operating on battery.
This indicator is displayed only if the internal
storage option is enabled. It displays the
approximate number of ECG records that
you can store in the remaining memory.
See
"Hookup Advisor Module" on page 61
for more information.
Current patient heart rate measured in
beats per minute.
The list of available menu options changes
depending on the function and the current
location within that function. For more
information, refer to
Options" on page
Identifies each waveform and indicates the
waveform quality.
Red = disconnected lead
"Preparing the Patient" on page
"Entering Patient Information" on page
MAC™ 800
Description
."Selecting Menu
39.
41.
2060026-001C
47.
Advertisement
Table of Contents
