Aci-Tipi Statement Is Not Included On Report; Paper Jams; Sd Card Not Present; Cannot Import Or Transmit Records Via Modem - GE MAC 800 Operator's Manual

Resting ecg analysis system
Hide thumbs Also See for MAC 800:
Table of Contents

Advertisement

ACI-TIPI Statement is not Included on Report

If the ACI-TIPI statement is not displayed when expected, do the following:
• Verify the ACI-TIPI option is activated.
For information on activating the ACI-TIPI option, refer to
115.
• Verify ACI-TIPI is enabled on the ECG.
For information, refer
• Verify the ACI-TIPI required information was entered.
The ACI-TIPI statement prints only if the patient's gender, date of birth, and chest
pain indication are included in the patient information.
• Verify the patient is 16 or older.
The ACI-TIPI statement does not print for pediatric patients.
• Verify the original ECG was acquired in an electrocardiograph with the ACI-TIPI
option.
If you attempt to print an ECG that was imported from an external device, the
cart does not generate an ACI-TIPI statement; it prints only if the statement was
saved as part of the ECG.

Paper Jams

If the paper jams while printing, verify the paper was inserted correctly. For details,
refer to the MAC™ 800 v2.0 Supplies and Accessories Reference Manual.

SD Card not Present

If you receive an error message stating that the SD card is not present or cannot be
found, do the following:
• Verify an SD card is inserted into the card slot on the device.
For details, refer to
• Verify the SD card is seated firmly.
The SD card clicks into place when seated firmly.
• Verify the SD card is formatted for a FAT16 or FAT32 file system.
To verify an SD card is formatted for the correct file system, do the following:
1.
Insert the card into an SD card reader attached to a PC.
2.
Copy any files you want to save from the SD card to a folder on the PC.
3.
Using the Windows Format command, specify either FAT16 or FAT32 for the file
system and format the card.
NOTE:
4.
Copy the files from the folder on the PC to the newly formatted SD card.

Cannot Import or Transmit Records via Modem

If you receive an error while attempting to import or transmit ECG records via modem,
do the following:
• Verify the correct communication option was activated.
2060026-001C
to"Resting ECG Setup" on page
"Rear View" on page
Formatting the SD card erases any existing files on the card.
MAC™ 800
"Options Setup" on page
91.
29.
Troubleshooting
131

Advertisement

Table of Contents
loading

Table of Contents