Vehicle
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bottom section of noise encapsulation
Air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hose
clip
(144)
Partition wall (A) between trap oxidizer and air
cleaner
Vacuum lines red/violet/brown on EGR valve (60)
and red/violet/blue on air recirculation valve
Clip (119) on corrugated pipe (61)
09.10 III - 15011
drive onto the platform or inspection pit.
detach, attach.
remove, install (09-400).
loosen and detach, attach intake hose (167).
remove, install (9 bolts) of which 6 are
accessible from above, 3 accessible from below
(Figure 4).
detach, attach.
loosen, tighten. Tightening torque 45 Nm.
EXIT