Table of Contents
Advertisement
19 Tighten connecting rod bolts to initial torque
of 30 Nm and then turn 90 - 100" .
20 Measure connecting rod bearing end play
while moving connecting rod directly at piston
pin. Assure that connecting rod moves freely in
relation to crankshaft. Use dial gauge holder
363 589 02 21 00.
Caution!
Disassemble oil pump and clean, replace if re-
quired. Replace oil pressure valve. Disassemble
oil filter and clean.
Install initial operation oil filter cartridge. Change
oil filter cartridge and oil after 1000-l 500 km.
03.10 - 320/17
EXIT
Hide quick links:
Advertisement
Table of Contents
