Following installation:
Engine
Cooling
system
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine oil capacities with oil dipstick code
(see " Service Product Specifications" for approved engine oils)
1st version, color code " red"
2nd version, color code " black"
3rd version, color code " brown"
1
st version, color code " black"
Specified viscosity classes for engine oil
according to SAE for continuous ambient
temperatures
Exact adherence to the SAE class specified for
the various ambient temperatures would result in
frequent oil changes. The temperature limits for
the SAE classes should therefore be regarded
as guidelines which may be exceeded for short
periods.
See " Service Product Specifications" for further
information regarding specified viscosity classes
and approved engine oils.
01.10 - 030/6
check engine oil, add, if required or fill engine
with new oil.
fill up and perform pressure test (20-017),
pressure tester 124 589 15 21 00.
start and check engine oil and cooling system
for leakage.
EXIT
Number
code on
handle
602141)
60316