Mercedes-Benz 603 Service Manual page 197

3 Check running surface for crankshaft radial
seal on crankshaft flange for damage.
4 Clean mounting hole for crankshaft radial
seal, deburr, if required.
5 Bolt inner part of installation tool
601 589 03 43 00 onto crankshaft flange.
6 Coat sealing lip of crankshaft radial seal and
opposite running surface lightly with oil, do not
use grease.
7 Slide crankshaft radial seal (arrow) over
inner part of installation tool 601 589 03 43 00.
8 Press crankshaft radial seal against stop in
end cover with outer part of installation tool
601 589 03 43 00.
Note
Assure that crankshaft radial seal is properly
seated.
9 Install flywheel or flywheel and driven plate
(03-410).
10 Check for leakage with engine running.
03.10 - 32713
EXIT