Replacing valve seat inserts
Valve guides checked (05-285).
Valve
seat
insert
Basic bore (D2)
Valve
seat
insert
Valve seats
turn out valve seat insert with the lathe tool.
Note operating instructions for the valve seat
turning equipment.
check (table). Bore out
to the repair stage, if
required.
Caution!
Machine basic bore for
the valve seat insert if
minimum overlap is not
achieved (Number 3).
supercool with liquid nitrogen and insert
into basic bore.
Do not touch supercooled valve seat inserts
with bare hands.
Valve seat insert must be square to the cylinder
head.
machine (05291).
EXIT