Mercedes-Benz 603 Service Manual page 84

12 Hoist engine with engine hoist until hex.
head bolts in oil pan are accessible in area of
timing case cover.
13 Remove hex. head bolts in oil pan in area of
timing case cover and loosen remaining bolts.
Installation note
Tightening torque M6 10 Nm,
M8 25 Nm.
14 Lower engine back onto front engine
mounts.
15 Remove hex. head bolts (arrows) for
mounting injection pump. Remove square nuts
on injection pump flange.
Installation note
Tightening torque 25 Nm.
16 Remove Allen bolts (arrows) in timing chain
case.
Installation note
Tightening torque 25 Nm.
01.10 - 210/g
\
P O l - 2 3 6 5 - 1 3
EXIT
PO-2212-13
I