Remove, Install, 25 Nm (Item - Mercedes-Benz 603 Service Manual

Model 201 (up to 03185):
Mount, engine stop (6) . .
Model 201 (up to 03185):
Engine shock absorber
Model 126:
Engine shock absorbers (24) left and right . . . . .
Engine speed sensor (L3) and ground strap
Oil level sensor (18)
Automatic transmission
Oil lines
Oil pan with attached side sections:
Oil pan side section (45b)
Front suspension eye on engine .............
Front engine mounts (28), left and right
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
01.10 - 310/2

remove, install, 25 Nm (item 3).

Note
Check engine stop, adjust, 130 Nm (22-220),
adjustment gauge 201 589 04 23 00.
remove, install, 10 Nm (item 4).
remove, install, 10 Nm (item 5).
remove, reinstall (item 6).
disconnect plug, reconnect (item
between transmission and oil cooler or
transmission air/oil cooler, unbolt at oil pan,
install and remove at radiator, reinstall (item 8).
Note
Plug oil lines before removal, clamp
000 589 40 37 00.
remove, install (item 9).
Note
Replace gasket (45~) for oil pan side section.
Tightening torque for hex. head bolts (41)
10 Nm.
hook in engine hoist, unhook (item 10).
remove Allen bolts from bottom, reinstall, 40
and 70 Nm (item 11).
hoist with engine hoist, lower back on engine
mounts (item 12).
remove from oil pan (45), reinstall (item 13).
M6 bolts 10 Nm,
M8 bolts 25 Nm.
Note
Observe different lengths of hex. head bolts.
EXIT