Mercedes-Benz 603 Service Manual page 97

13
Remove hex. head bolts
Installation note
Observe different lengths of hex. head bolts.
Tightening torque
14 Remove oil pan (45) from crankcase toge-
ther with oil pan gasket (45a); remove oil pan
toward front of vehicle, turn crankshaft slightly if
required.
Installation note
Clean gasket residues off of parting surface on
oil pan. Replace oil pan gasket.
15 Assemble in opposite order.
16 After assembly warm up engine and check
oil pan for leakage.
01.10 - 31018
(19)
of oil pan (45).
M6 10 Nm,
M 8 25 Nm.
EXIT
PO 1.023913