Installation
Note
The group code letters (arrows) are stamped on
the crankcase mating surface. Only pistons with
the group code letter " X" are available for repair.
These pistons should also be installed in cylinder
bores with group code letters " A" or " 6" .
When repairing hone cylinder bores according to
dimensions of present pistons " X" plus piston
clearance.
5
Position piston on connecting rod so that
arrow (1) points toward front of vehicle and
retaining grooves (2) in connecting rod point
toward left side of engine.
Caution !
Do not heat pistons.
6
Coat piston pins with oil and press in by
hand.
03.10 - 31615
EXIT