Mercedes-Benz 603 Service Manual page 193

Crankshaft radial seal
Note
The sealing ring for the repair crankshaft radial
seal is offset 3 mm toward the inside so that it
will not run in a groove left on the hub by the
standard crankshaft radial seal.
Part No. for repair crankshaft radial seal:
010 997 34 47 or 010 997 68 47.
Tightening torques
Allen bolts for crankshaft pulley
Mounting bolt for hub
Special tools
001 589 66 21 00
Commercially available too tool
Adapter 314" square socket
to 1,' 2" square head
03.10 - 32412
(31) replace. Deburr and clean mounting bore. Coat
sealing lip with oil and press in with special tool
601 589 03 14 00 (item 4).
601 589 03 14 00
03
e.g.
D-5630 Remscheid
Order No. 1058
EXIT
Nm
25
320
001 589 74 21 00
00
R-l