Mercedes-Benz 603 Service Manual page 288

7 Place loose enclosed outer clip of the
connecting link (with the IWIS marking stamped
on) in assembly tool 000 589 58 43 00 (arrow).
The outer clip is retained magnetically.
Put assembly tool 000 589 58 43 00 on
8
connecting link and press on clip up to the stop.
Caution!
Put clip on so that both rivet pins engage.
9 Turn punch (02) of assembly tool
000 589 58 43 00 so that the notch (arrow)
points forwards.
10 Place assembly tool exactly over the center
of the pins. Rivet the connecting link pins
individually, whilst tightening spindle to
approx. 30 35 Nm (Reference value).
05 10 3206
EXIT