Cylinder head removed:
1
When the cylinder head is removed the
scope of work for refinishing is the same except
for items 5 and 7. Instead of items 5 and 7
measure the projection dimension (c).
Cylinder head installed:
2
Plug or seal off prechamber mounting bores
toward combustion chamber (e.g. with rag), so
that chips cannot get into the combustion
chamber.
3
Remove protective sleeve from
countersinking tool 601 589 00 66 00.
4
Install countersinking tool 601 589 00 66 00
into the prechamber mounting bore to be
refinished down to the stop.
5
Measure interval " X" between top of shaft
(01) and top of sleeve (02) and note value.
Note
When the cylinder head is installed, measuring
the interval ' IX" replaces measuring the
projection dimension " C" .
01.10 - 41014
EXIT