0 3 4 2 0
Flywheel and driven plate removed (03-410).
Dimension (b)
Dimension (a) ........................
03.10
measure, max. 17 mm, min. 15.6 mm.
If material removal causes dimension (a) to
exceed max. causing dimension (b) to be less
than 15.6 mm, replace flywheel.
measure, engine 602: 22.5 mm, engine 603:
19.4 mm. Maximum material removal
if material removal is greater than
replace flywheel.
Caution!
If the clutch surface (A) is refinished, the
mounting surface (B) must be refinished by the
same amount so that distance (a) is
maintained.
EXIT
1
mm,
1
mm,