Table of Contents
Advertisement
20 Install new trap oxidizer, insert supporting
bracket at the same time and install. Tightening
torque
Nm.
21 Install EGR valve together with corrugated
pipe.
22 Install partition panel.
23 Connect vacuum line red/violetbrown to
EGR valve and vacuum line red/violetblue to air
recirculation valve.
24 Connect intake hose to air flow sensor and
tighten hose clip.
25 Install air cleaner complete.
26 Completely reinstall bottom section of noise
encapsulation .
EXIT
Hide quick links:
Advertisement
Table of Contents
