Boring, Honing And Replacement Of Cylinder Sleeves; Items - Mercedes-Benz 603 Service Manual

oring, honing and replacement of cylinder sleeves
Cylinder bore
Cylinder sleeves (68)
Block (69)
Cylinder sleeves
01.10
measure (01-l 10).
press out, punch 603 589 00
clean basic bores for sleeves and check
diameter (see table) with internal measuring
instrument (items 2 and 3).
Note
If the permissible values are exceeded, replace
block.
press in and maintain pressure for approx. 7
seconds to seat sleeve, punch
603 589 00 15 00 (item 4).
EXIT
15
00 (item 1).